Publicidad
Idiomas disponibles
Idiomas disponibles
t
Min 4x
1Y4"
[3
Unscrew
the height adjustable
feet until the mark
on the base has reached the indicated guide
dimension
(11/4"/ 32 mm).
[_lt
is very important
to comply
with this dimension
for
the subsequent
alignment
of the furniture fronts.
C3 Align the furniture fronts with the spirit level.
_i]
Note:
Do not twist or jam the appliance
inside the cavity!
When unscrewing
the height adjustable
feet,
proceed
gradually:
Always alternate between
left
and right, left and right, etc..
The adjustment
of the rear feet is facilitated
if the
appliance
is unloaded
at the rear.
If using a wooden
beam as an alternative
anti tip
device according
to point 5 of this installation
manual, rotate the appliance
all the way towards
the wooden
beam.
11.
C3
Attaching
the appliance
to the
top of the cavity
Screw the attachment
plate tugs (top) to the
overhead
furniture/fixtures.
[3
Fix the attachment
plate side tugs (top) depending
on the installation
situation.
If there is no gap or only
a slight gap, it is not necessary to fix the side tugs.
C3
If there is a fairly large gap above the appliance,
fit a
wooden
beam above the appliance,
ensuring that
the wooden
beam fits the gap exactly.
18
Publicidad
