Greencut GLM1400C Guía De Mantenimiento página 56

PRECAUTIONS FOR USE
SAFE OPERATING PRACTICES
SAFETY IN MAINTENANCE, TRANSPORT AND STORAGE
•
Do not modify the product controls.
•
Check regularly for broken parts or other conditions that may affect the proper operation of the machine.
•
Replace worn or damaged parts immediately with original spare parts only.
•
Carry out regular maintenance. Do not attempt any maintenance or repair work that is not described in these
operating instructions. We recommend that maintenance and repair work not described in this manual be
carried out by an authorised service agent.
•
Always clean dust and dirt from the machine after finishing work.
•
Do not clean the machine with solvents, flammable liquids or harsh abrasives.
•
Keep the handles of this machine dry and clean.
•
Keep cutting tools sharp and clean. Well maintained cutting tools reduce the likelihood of incidents by being
easier to control.
•
If the machine starts to vibrate strangely, turn it off and examine it to find the cause. If you do not detect the
cause, take your machine to an Authorised Service Centre.
•
To avoid burns or fire hazards, allow the equipment to cool down completely before transporting or storing it.
•
When transporting the product, make sure that the engine is stopped and that the machine is properly
secured to prevent it from tipping over or being damaged.
•
The equipment is not weatherproof and should not be stored in direct sunlight, in high ambient temperatures
or in damp or wet locations.
•
Store the product out of the reach of children.
GENERAL INFORMATION
•
This mower is designed for domestic lawns. Due to the physical hazard to the user or others, it must not be
used for other purposes.
•
Read the instructions carefully and become familiar with the controls and the proper use of the appliance.
•
Mow only during daylight hours or with the aid of adequate artificial light.
•
Never allow children or persons unfamiliar with these instructions to use the appliance. Local regulations may
restrict the age of the operator.
•
Never mow the lawn while people, especially children, or pets are nearby.
•
The operator or user is responsible for accidents or hazards occurring to other people or their property.
•
Do not use the scarifier if the cables are damaged or worn.
•
Do not connect a damaged cable or touch it before disconnecting it from the power supply.
•
Do not touch the tines before the machine is disconnected from the power supply and the tines have come
to a complete stop.
•
Keep extension cords away from the blade. The blade can damage the cables and cause contact with live
parts.
•
Read the instructions carefully for safe operation of the machine.
•
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
•
Children should be supervised to ensure that they do not play with the appliance.
CABLES
•
Works with safety cables. For connection only, use a power cable H05VVV-F or heavier, with a minimum cross-
section of 2X0.75 mm² and a maximum length of 25 m. Protect plugs and couplings from splashing.
•
Protect plugs and couplings from splashes.
•
Use a leakage protection system (RCD) with a leakage current of no more than 30 mA.
•
Make sure it does not rub against sharp edges or sharp objects. Do not run the cable through door or window
openings.
•
The Switching devices must not be removed or bypassed (e.g. fastening the switching lever to the guide bar).
•
Unplug the machine every time you leave it, before clearing a blockage, before checking, cleaning and
working on the machine or after hitting a foreign object. In the latter case, inspect the machine for damage
and carry out the necessary repairs.
•
If the appliance starts to vibrate abnormally, check it immediately.
•
If the connection cable is damaged during use, disconnect it immediately from the main power supply.
•
Do not touch the cable before it has been disconnected from the mains.
56
EN - GLM1400C