Greencut GLM1400C Guía De Mantenimiento página 66

STORAGE
TRANSPORTATION AND STORAGE
•
Allow the equipment to cool completely before moving or storing it.
•
Clean the mower thoroughly before storing.
•
Keep all nuts, bolts and screws tight to ensure that the appliance is in safe operating
condition.
•
Please note that the equipment is not weatherproof and should not be stored in direct
sunlight. Always store the product in a clean, safe and dry place with temperatures between
0º and 45ºC.
•
To avoid loss of fuel during transport, the product should be secured in its normal operating
position with the fuel cap closed.
•
Avoid exposure to direct sunlight when placed in a vehicle. If left inside a closed vehicle for
many hours, the high temperatures could cause the fuel to evaporate, which could cause an
explosion.
•
For long periods of storage, store the machine without fuel. Stored fuels should be stabilised
with a stabiliser.
•
Completely drain the fuel tank and run it again until it stops, this will serve to remove all
traces of fuel and prevent carburettor problems in the future.
•
Check the collection basket frequently for wear and tear or damage.
•
Replace worn or damaged parts for safety.
•
Never store equipment where flammable materials, combustible gases or liquids, etc. are
present. To reduce the risk of fire, keep the machine clean by removing debris, oil and grease.
•
Have your mower thoroughly checked by an authorised service centre once a year.
•
Store the machine out of the reach of children.
DISPOSAL AND RECYCLING
•
Worn out products are potentially recyclable and should not be disposed of in the normal
household waste. Help us to protect the environment and preserve natural resources.
•
Dispose of the device in an environmentally friendly way. Do not throw it away with
household waste. Its plastic and metal components can be separated and recycled. Take this
appliance to an approved recycling centre (Green Dot).
•
Petrol, used oil, oil/petrol mixtures and objects soiled with petrol (e.g. rags) must not be
disposed of with normal household waste, down the drain, on the ground, in rivers, lakes or
the sea. Objects soiled with oil must be disposed of in accordance with local regulations: take
them to a recycling centre.
•
The materials used in the packaging of the machine are recyclable: please dispose of them in
the appropriate container.
GUARANTEE
GREENCUT guarantees all products for a period of 3 years (valid for Europe).
The warranty is subject to the date of purchase taking into account the intended use of the product. As a condition
of the warranty, the original receipt must be presented indicating the date of purchase and its description as well as
the defective tool.
The warranty does not cover wear and tear due to normal use, especially on battery, blades, blade
fasteners, turbines, light sources, fan and drive belts, impellers, air filters, spark plugs and damage caused
by improper use, especially non-compliance with the operating and maintenance instructions.
The warranty is void if repairs or modifications have been carried out by the consumer or by anyone other
than the original GREENCUT spare parts or by any negligence on his part.
In the event of a justified warranty claim, we are entitled, at our discretion, to repair or replace the defective tool free
of charge. Further claims beyond this warranty are not valid.
66
EN - GLM1400C