TROUBLESHOOTING
PROBLEM-SOLUTION TABLE
THE TABLE INCLUDES SOME OF THE MOST COMMON PROBLEMS AND THEIR REMEDIES.
PROBLEM
•
Check the power and turn on the machine.
Machine
•
Check the plug.
it doesn't work
•
Replace the blown fuse.
Electrical
•
Let the machine cool and increase the cutting height before
protection is
continuing.
activated
The machine
leaves an uneven
•
Cutting height is low, increase cutting height.
finish
Cutting blade
•
Replace the blade with a new one.
is dull
There is excessive
•
The blade bolt is loose, please tighten the bolt.
vibration/noise
•
The cutting blade is damaged, replace the blade.
SOLUTION
67
EN - GLM1400C