Publicidad
Idiomas disponibles
Idiomas disponibles
• Impact drilling in masonry
Only operate in dry areas.
Any other use that is not expressly permit-
ted in this instruction manual may pose
a serious hazard to the user and result in
damage to the device. The operator or
user of the machine is responsible for any
accidents or personal injury and/or mater-
ial damage to third parties or their prop-
erty. The machine is intended to be used
by do-it-yourselfers. It was not designed
for heavy commercial use. The warranty
is void in the case of commercial use. The
manufacturer is not liable for damage
caused by improper use or incorrect oper-
ation.
The device is part of the X 20 V TEAM
series and can be operated with bat-
teries of the X 20 V TEAM series. Bat-
teries of the X 20 V TEAM series may
only be charged using chargers of the
X 20 V TEAM series.
Scope of delivery/
accessories
Unpack the device and check that
everything is present.
Dispose of the packaging material prop-
erly.
• Cordless Hammer Drill
• Depth stop
• Auxiliary handle
• 3x Performance drill (X cutting edge):
⌀ 6, 8, 10 mm
• Lubrication grease
• Cloth
• Storage case
• Translation of the original instructions
The rechargeable battery and
charger are not included in deliv-
ery.
Overview
The illustrations for the
device can be found on the
front fold-out page.
1 Tool holder SDS-Plus
2 Dust cap
3 Locking sleeve
4 Holder for auxiliary handle
5 Retaining knob of function selection
switch
6 Function selection switch
7 On/Off switch
8 Direction of rotation switch
9 Handle
10 "Connected" indicator
11 Battery holder
12 Battery release
13 Charge level indicator
14 Button Charge level indicator Battery
15 Battery
16 Display (level)
17 Speed button
18 LED work light
19 Loop (Auxiliary handle)
20 Auxiliary handle
21 Lubrication grease
22 Depth stop
23 Drill
24 Cloth
25 Battery charger
26 Storage case
Fig. C
27 Locking screw of depth stop
28 Handle (Auxiliary handle)
GB
MT
25
Publicidad
