EUFAB AMBER 3 Manual De Instrucciones página 13

9. TIPS AND TRICKS
9.1 PIN ASSIGNMENT OF THE 13-PIN CONNECTOR
Left indicator
Rear fog light
Ground for contact 1 - 8
Right indicator
Right-hand tail light
(incl. marker light)
Brake light
Left-hand tail light
(incl. marker light)
Reversing light
Steady current (steady plus)
Charging cable
Charging cable -/ ground
(for battery in trailer)
Control cable for trailer identifi cation
(connection)
against ground pin 3 in trailer
Ground for contact (power supply)
Plug
58L
L
54
54G
R
58R
31
31
10. CHANGING THE BULBS
Required tools: Screwdriver of PH1 size. Unscrew the cross-head screws of the
lens and remove the lens. Press the bulb to be replaced lightly into the socket
and then turn it a quarter of a turn. Now remove the bulb from the socket.
Insert the new bulb in the appropriate position.
List of bulbs:
Brake light/ Rear light: 12 V 21/5 W BAY15d
Indicator: 12 V 21W
Rear fog light: 12 V 21W
Reverse light: 12 V 21W
Licence plate illumination: 12 V 5W
12
Pin 1, L yellow
Pin 2, 54G blue
Pin 3, 31 white
Pin 4, R green
Pin 5, 58R brown
Pin 6, 54 red
Pin 7, 58L black
Pin 8 grey
Pin 9 not used brown/blue
Pin 10 not used brown/red
Pin 11 not used
Pin 12
Pin 13 not used white/black
Socket
58L
L
54
54G
R
58R
31
31
BAU15S orange
BA15S
BA15S
SV8,5 11 x 38 (Soffi t)
11. NOTES FOR ENVIRONMENTAL PROTECTION
As the bicycle rack has a lighting system, it is subject to the
Ordinance on Waste Electrical and Electronic Equipment and
must be disposed of as waste electrical and electronic equipment
once its service life has expired.
The materials are recyclable. You make an important contribution
to protecting our environment by recycling, material utilisation
or other forms of reusing waste equipment.
12. CONTACT INFORMATION
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com