EUFAB AMBER 3 Manual De Instrucciones página 8

11. HINWEISE ZUM UMWELTSCHUTZ
Da der Fahrradträger eine Beleuchtungsanlage besitzt,
unterliegt er der Elektroaltgeräteverordnung und muss am Ende
seiner Nutzungsdauer entsprechend als Elektroaltgerät entsorgt
werden.
Die Materialien sind recycelbar. Durch Recycling, stoffl iche
Verwertung oder andere Formen der Wiederverwendung von
Altgeräten leisten Sie einen wichtigen Beitrag zum Schutz
unserer Umwelt!
Entsorgen Sie den Fahrradträger entsprechend den in Ihrem
Land gültigen Gesetzen und Bestimmungen.
12. KONTAKTINFORMATIONEN
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Deutschland
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
Bicycle rack AMBER 3 for trailer tow bar
CONTENTS
1. PROPER USE OF THE PRODUCT ________________________7
2. SCOPE OF DELIVERY ______________________________7
3. SPECIFICATIONS _________________________________7
4. TOW BAR REQUIREMENTS ___________________________7
5. SAFETY NOTES/WARNINGS __________________________8
6. MOUNTING THE BICYCLE RACK ________________________8
7. TRANSPORT OF E-BIKES ___________________________ 11
8. MAINTENANCE _________________________________ 11
9. TIPS AND TRICKS _______________________________ 12
9.1 PIN ASSIGNMENT OF THE 13-PIN CONNECTOR ______________ 12
10. CHANGING THE BULBS ____________________________ 12
11. NOTES FOR ENVIRONMENTAL PROTECTION _______________ 12
12. CONTACT INFORMATION ___________________________ 12
WARNING
Read the operating instructions through carefully
prior to initial use and observe all of the safety notes!
Store original packaging, proof of purchase as well
as these instructions for future reference! Not obser-
ving such may lead to personal injury, damages to the
device or your property! Prior to initial use, check the
contents of the packaging to ensure that they are in
perfect condition and complete!
1. PROPER USE OF THE PRODUCT
This bicycle rack is mounted to the trailer tow bar of a car and is designed
for the transportation of up to three bicycles. Intended use also includes
the observation of all information provided in these mounting instructions,
particularly of the safety instructions. Any other use is considered improper
and can lead to property damage or personal injury. EAL GmbH assumes no
liability for damage resulting from improper use.
2. SCOPE OF DELIVERY
1 x Base frame
6 x Wheel rail halves
1 x Lamp mount set
1 x U-tube
1 x Frame holder, short
1 x Frame holder, long
1 x Frame holder, wheel to wheel
3 x Plastic cover
9 x Tensioning strap, short
1 x Tensioning strap, long
12 x Lock screw M6 x 50
12 x Washer 17.8 x 6.5 x 1.1
3. SPECIFICATIONS
Weight: 16 kg
Payload: 34 kg at 50 kg supporting load
44 kg at 60 kg supporting load
59 kg at 75 kg supporting load
max. 60 kg at 90 kg supporting load
max. 60 kg at 100 kg supporting load
Electrical connection 13-pin
4. TOW BAR REQUIREMENTS
• The trailer tow bar must be approved in its construction.
• Ball and ball rod must have been forged in one piece.
• Mount the bicycle rack only on a coupling made of steel St52-3, grey cast
iron GGG52 or better.
• Unsuitable ball rods made of GGG40.
• The D-value of the tow bar ball must be at least 7.6 kN
• Never mount the carrier on a coupling made of aluminium, other light
metals or plastic.
• These are manufactured e.g. by Westfalia for the following vehicles:
12 x Nut M6
1 x Cross-headed screw M5 x 12
1 x Washer 9.8 x 5.4 x 0.9
1 x Spring washer 8.4 x 5.5 x 1.5
2 x Cross-headed screw M5 x 35
2 x Spring washer 8.1 x 5.5 x 1.2
2 x Washer 9.7 x 5.3 x 0.9
2 x Lock screw M8 x 60
2 x Washer 15.8 x 8.5 x 1.1
2 x Knob nut M8
Cable tie
7