Angelo Po 08WFA4G Manual De Uso E Instalación página 51

REPLACING THE OVEN BURNER NOZZLE
To carry out this operation, proceed as follows.
1 - Turn off the gas supply tap
2 - Undo the screws (B) and remove the control
panel (A).
3 - Unscrew the nozzle (C) and replace it with the
one suitable for the type of gas in use (see table
at back of manual).
4 - Replace the control panel.
REPLACING TOP BURNER PILOT LIGHT NOZZLE
To carry out this operation, proceed as follows.
1 - Turn off the gas supply tap
2 - Pull off the knob (A).
3 - Undo the screws (C) and remove the control
panels (B).
4 - Remove the pipe (D).
5 - Remove the nozzle (E) and replace it with the
one suitable for the type of gas in use (see table
at back of manual).
6 - Replace the pipe (D), the control panels (B) and
the control knobs (A).
REPLACING OVEN BURNER PILOT LIGHT NOZZLE
To carry out this operation, proceed as follows.
1 - Access the pilot light through the opening provi-
ded in the bottom of the appliance.
2 - Unscrew the cap (B).
3 - Remove the nozzle (C) and replace it with the
one suitable for the type of gas in use (see table
at back of manual).
4 - Replace the cap (B).
A
C
A C B
- 23 -
B
C
IDM-39611401100.tif
D E
10
IDM-39612102401.tif
C
B
IDM-396011401201.tif
IT
GB
DE
FR
ES
English