ATON DLATP Manual Del Usuario página 14

DLATP Touch Pad Controller
3. Connections
Connections for the DLATP consist of:
1. DLA 2/4/6
2. DLATP
3. External IR Receiver (Optional)
DLA 2/4/6 Connections
Simply connect the pre-run Cat-5 wire from the cor-
rect IR Input port of the DLA 2/4/6 to the fl iplock
connector port on the DLATP as shown in Figure 3.1.
DLATP Rear
CAT-5
WIRING COLOR CODE
Figure 3.1: IR INPUT to DLATP Connection
12
DLA 2/4/6
Room IR Input
©2008 • All rights reserved.