Publicidad
Idiomas disponibles
Idiomas disponibles
DLATP Touch Pad Controller
5
Sense Status LED*
Indicates if Source Equipment is powered ON
with a blue LED. This LED will also blink 3 times
when an All Off command sent by the DLATP
(Press and hold the power button for 3 seconds)
has been received by the DLA2/4/6.
* Requires an ATON PS2 power supply plugged into the sense input
of the DLA2/4/6 and the switched input of an AV Receiver.
6
MUTE Indicator LED
The MUTE Indicator LED illuminates when the
Room has been placed in MUTE from the touch-
pad, RF or IR Remote.
7
Volume UP/DOWN
Ramps VOLUME UP and DOWN or takes Room
out of Mute. The Volume Bar
DOWN to correspond to the button presses.
After 30 seconds without touch activity, the DLATP's
LEDs and backlighting will turn off. Press the touch
surface once to wake up and display the current sta-
tus of the touch pad. If the Room is OFF, the Volume
Bar and MUTE Status indicators will not be illumi-
nated. If the Room is ON, the Volume Bar or MUTE
Status indicators will be illuminated.
© 2008 • All rights reserved.
3
ramps UP or
19
Publicidad
