Publicidad
Idiomas disponibles
Idiomas disponibles
DLATP Touch Pad Controller
Symptom
Cause
2. Defective
speaker(s)
3. Source(s) not
playing audio
4. Zone is in MUTE
Distorted
1. Source Input
audio
Gain/Volume too
high on Amp/Re-
ceiver
2. Defective/Incom-
patible speaker
No Status
Zone I.D. dip switch
set incorrectly
© 2008 • All rights reserved.
Solution
Swap with known good
speaker and test.
Verify that source(s)
turned ON, playing audio,
etc. Check Tape Monitor
settings on A/V or Stereo
Receiver.
Check MUTE Indicator
LED on DLATP.
Reduce Gain/Volume
settings on Amp/Re-
ceiver.
Check for damaged
speaker.
Check label on rear of
DLATP and set correctly.
21
Publicidad
