ATON DLATP Manual Del Usuario página 15

DLATP Touch Pad Controller
External IR Receiver Connections
Use a standard IR Receiver such as ATON's AIR5 or
AIR6 in areas where a hand-held remote needs to
be pointed somewhere other than at the touch pad.
Typical IR Receiver locations are near a TV or other
equipment such as a Local Source (DVD Player, CD
Player, A/V Receiver, etc.). A Plasma friendly receiver
may be added if fl ooding occurs. Disable the onboard
IR receiver as shown in Figure 4.3. Use a Cat-5 wire
to extend the IR Receiver's cable if necessary and
connect the other end to the DLATP as shown in
Figure 3.2. It may also be connected directly to the
fl iplock connectors on the rear of the DLATP. Only
three conductors of the Cat-5 will be used.
DLATP Rear
AIR5 IR Receiver
Internal Wire Colors
White IR OUT
Black GND
Red
+12V
Cat-5
Figure 3.2: External IR Receiver Connection
© 2008 • All rights reserved.
DLA 2/4/6
Room IR Input
Yellow STATUS
X
(Not Connected)
White Blue
Brown
White Green
Orange
13