Hilti PD-E Manual Del Usuario página 17

5.9.4 Min/max delta function
1. Select the symbol for the min/max delta function from the special
functions menu.
2. Aim the tool at the target point and press the "Measure" button.
3. Press the "Measure" button to stop measuring.
▶ The last distances measured are shown in the results line.
5.9.5 Data storage
1. Select the data storage symbol from the special functions menu.
The tool can save up to 30 screens, including the graphical symbols.
If 30 screens have already been saved, the oldest one will be deleted
automatically when a new screen is saved.
2. To delete data storage memory, press and hold the C-button for 2
seconds while the data storage screen is displayed.
5.10 Trapezoid
5.10.1 Trapezoid function (3 distances)
1. Select the symbol for the trapezoid function for 3 distances from the
trapezoid functions menu.
2. Aim the tool at the target point and press the "Measure" button.
▶ After measuring the first distance, the graphical display automatically
prompts you to take the next measurement.
3. Aim the tool at the next target point and press the "Measure" button.
4. Aim the tool at the third target point and press the "Measure" button.
5.10.2 Trapezoid with inclination (2 distances, 1 angle)
1. Select the symbol for the trapezoid function with inclination from the
trapezoid functions menu.
2. Aim the tool at the target point and press the "Measure" button.
3. Aim the tool at the next target point and press the "Measure" button.
5.11 Pythagoras
5.11.1 Single Pythagoras
1. Aim the tool at the target point and press the "Measure" button.
2. Aim the tool at the next target point and press the "Measure" button.
In order to achieve accurate results, the second distance must be
measured at right angles to the target distance.
5.11.2 Double Pythagoras
1. Aim the tool at the target point and press the "Measure" button.
*2068470*
2068470 English 13