Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
WARNING:
other parts may create a hazard or cause product damage. To ensure safety and
reliability, all repairs should be performed by a qualified service technician.
WARNING:
from the product when cleaning or performing any maintenance.
CLEANING
Use a soft brush to remove debris from all air intakes and cutting blades.
To remove pitch and other sticky residue, spray the blades with resin solvent. Run
the motor briefly so that the solvent is evenly distributed, then wipe the surface with
a dry cloth.
WARNING:
solvents when cleaning plastic parts. Most plastics are susceptible to damage from
various types of commercial solvents. Use clean cloth to remove dirt, dust, oil, grease,
etc.
All hedge trimmer service, other than the items listed in these maintenance
instructions, should be performed by competent hedge trimmer service personnel.
SHARPENING THE BLADES
When cutting performance and behavior begin to deteriorate, re-sharpen the blades. It
is recommended to have the blades re-sharpened by a qualified service technician.
NOTICE:
Do not operate your hedge trimmer with dull or damaged blades. This may
cause overload and will give unsatisfactory cutting results.
56-VOLT LITHIUM-ION COMMERCIAL 21" EXTENDED POLE HEDGE TRIMMER — HTX5310-P/HTX5310-P-FC
When servicing, only use identical replacement parts. Use of any
To avoid serious personal injury, always remove the battery pack
Never use water for cleaning your hedge trimmer. Avoid using
33
Publicidad
