Publicidad
Step 15
å
NOTE: You will need someone's help in this step.
å
First, fill four small holes in the TOP (U2) 1/4 to 1/2 full with GLUE (177M). Then,
insert four WOOD DOWELS (15F) into the holes. Wipe away the excess GLUE.
å
Now, fill the holes in the LEGS (H, P, Q, and R) 1/4 to 1/2 full with GLUE (177M).
å
Fasten the RIGHT END (A) and RIGHT UPRIGHT (D2) to the TOP (U2). Tighten
four TWIST-LOCK® FASTENERS.
å
NOTE: Be sure the WOOD DOWELS in the TOP insert into the LEGS. Wipe away
the excess GLUE.
A
H
15F
(4 used)
Page 20
Q
D2
P
428729
R
Meet Part (U2). This component has
been engineered to be lighter, stronger,
faster... well ok. Not technically faster.
But definitely makes for a sturdier
Executive Desk that' s easier to assemble
and friendlier to the environment.
U2
2
177M
Fill the holes 1/4 to 1/2 full with GLUE.
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely difficult.
The large hole
must be here.
www.sauder.com/service
Publicidad
