Publicidad
1. Final gear case cover
1. Couvercle du carter de transmission finale
1. Cubierta del cárter de la transmisión final 2. Perno (× 2)
4. Install the oil filler bolt, and then tighten it to
Replacing the final gear oil
1. Remove the final gear case cover by remov-
2. Place the ATV on a level surface.
3. Place a container under the final gear case to
2. Bolt (× 2)
2. Boulon (× 2)
8-33
the specified torque.
Tightening torque:
Final gear oil filler bolt:
23 Nm (2.3 m·kgf)
ing the bolts.
collect the used oil.
Publicidad
