Kuppersbusch FKG6875.1S Instrucciones De Uso página 21

5.1 Defrosting
• Your appliance performs automatic
defrosting. The water formed as a
result of defrosting passes through
the water collection spout, flows into
the vaporisation container behind your
appliance and evaporates there.
• Make sure you have disconnected the
plug of your appliance before cleaning
the vaporisation container.
• Remove the vaporisation container from
its position by removing the screws as
indicated. Clean it with soapy water at
specific time intervals. This will prevent
odours from forming.
Replacing LED Lighting
If your appliance has LED lighting
contact the help desk as this should
be changed by authorized personnel only.
If product equipped with LED lamp
This product contains a light source of
energy efficiency class <E>.
If product equipped with LED
LED card(s)
This product contains a light source of
energy efficiency class <F>.
6 SHIPMENT AND
REPOSITIONING
6.1 Transportation and Changing
• The original packaging and foam may be
kept for re-transportation (optional).
• Fasten your appliance with thick
packaging, bands or strong cords and
follow the instructions for transportation
on the packaging.
• Remove all movable parts (shelves,
accessories, vegetable bins, and so on)
or fix them into the appliance against
shocks using bands when re-positioning
or transporting.
6.2 Repositioning the Door
• It is not possible to change the opening
direction of your appliance door if door
handles are installed on the front surface
of the appliance door.
• It is possible to change the opening
direction of the door on models without
handles.
• If the door-opening direction of your
appliance can be changed, contact the
nearest Authorised Service Centre to
change the opening direction.
Strip(s) or
EN - 21
Positioning
Always carry your appliance in the
upright position.