Electrolux ENV9MD18S Manual De Instrucciones página 11

2. The fridge compartment is switched
on and the previous set temperature
is restored.
To adjust the temperature,
refer to "Temperature
regulation".
4.6 Switching off the freezer
It is possible to switch off only the freezer
compartment leaving the fridge
compartment on.
1. Press and hold the freezer
temperature button for 5 seconds.
The display shows blinking
2. Once the freezer compartment is
switched off, the display reads
4.7 Switching on the freezer
To switch on the freezer compartment:
1. Press and hold the freezer
temperature button for 5 seconds.
The display shows blinking
2. The freezer compartment is switched
on and the previous set temperature
is restored.
To adjust the temperature,
refer to "Temperature
regulation".
4.8 MultiSwitch
With the MultiSwitch function, you can
convert the freezer compartment into a
fridge and thus effectively expand the
appliance's fridge capacity.
Before activating the
MultiSwitch function remove
the frozen food from the
freezer compartment to
avoid accidental defrosting.
To convert the freezer compartment into
a fridge:
1. Tap the freezer temperature button
repeatedly until the display shows
.
starts blinking.
2. Press within the next 7 seconds.
If you do not press the button within
this time, the freezer compartment
will not convert into a fridge.
3. The freezer temperature indicator
shows the temperature of the
MultiSwitch compartment (4°C).
When the MultiSwitch function is on:
• the High temperature alarm is
.
disabled
• it is not possible to activate the Extra
.
Freeze function.
The MultiSwitch function deactivates
when you switch off the appliance.
The MultiSwitch function resumes
operation once the power is restored
after a power failure.
. The MultiSwitch function deactivates
when you switch off the converted
compartment.
To convert the MultiSwitch compartment
back into a freezer:
1. Press the freezer temperature button.
2. Press
If you do not press the button within
this time, the MultiSwitch
compartment will not convert back
into a freezer.
3. The freezer temperature indicator
shows the temperature of the freezer
compartment.
The MultiSwitch
compartment reaches the
set temperature after 24 h.
Wait until the MultiSwitch
compartment has reached
the set temperature before
using it.
Before deactivating the
MultiSwitch function, remove
the food from the
MultiSwitch compartment to
avoid freezing the fresh
food.
starts blinking.
within the next 7 seconds.
ENGLISH 11