Publicidad
Idiomas disponibles
Idiomas disponibles
14
www.electrolux.com
notifications, control and monitor your
appliance from your mobile device.
To connect the appliance you need:
• Wireless network with the Internet
connection,
• Mobile device connected to your
wireless network.
Frequency/Proto‐
col
Power
Encryption
Installing the mobile application
Take the following steps to connect the
appliance to Wi-Fi:
1. Make sure that the appliance is
plugged into a power socket and
turned on.
2. Make sure that your mobile device is
connected to the same wireless
network you want to add your
appliance to.
3. Download the dedicated application
on your mobile device from Google
Play (Android) or App Store (iOS)
and install the application on your
mobile device.
4. Open the app and register to create
an account.
Configuring the appliance wireless
connection
Follow the instructions in the app to
complete the onboarding process:
1. Press and hold the Connectivity
button on your appliance for 3
seconds until you hear a beep. This
will start the Wi-Fi system.
2. After few seconds
the display and the Connectivity
indicator starts blinking slowly.
3. Continue to follow the instructions in
the app to complete the onboarding
process.
4. While the process is ongoing, the
display may temporarily show
Wi-Fi: 2.4 GHz /
802.11 bgn
Wi-Fi 2.4 GHz:
<20 dBm
WPA-PSK, WPA2-
PSK, WPA3-Per‐
sonal
appears on
.
After the successful onboarding, the
Connectivity indicator stops flashing and
becomes solid. Display shows the set
temperatures.
Disabling the appliance wireless
connection
You can temporarily disable the Wi-Fi
connection by pressing and holding the
Connectivity button for 3 seconds. The
Connectivity indicator switches off and
the appliance beeps once.
Once the Wi-Fi connection is disabled, to
automatically re-establish the connection
press and hold the Connectivity button
for 3 seconds.
After reset, the Connectivity
indicator may be off. Wait a
few seconds until it turns on.
Resetting the appliance wireless
connection
Before you reset the Wi-Fi configuration,
make sure that the Connectivity indicator
is visible on the display. It means that the
function is switched on. If the function is
switched off, the attempt to reset the
connection will turn the function on.
You can reset the Wi-Fi configuration by
pressing and holding the Connectivity
button for 10 seconds. The appliance will
beep to confirm the successful reset.
To re-establish the connection, repeat all
the steps described in section "Disabling
the appliance wireless connection"
section.
4.17 Setting mode
The Setting mode allows you to:
• Enable or disable the ECOMETER
indicator
• Enable or disable the button sounds
• Change the temperature units from °C
to °F
• Enable or disable the Rest mode
• Enable or disable the Sabbath mode
• Reset the appliance to factory settings
Activating the Setting mode
To activate the Setting mode:
1. Press and hold the ECO button for
approximately 3 seconds. When the
Publicidad
