FILLING WITH WATER
8.1
4
Figure
5
Figure
6
Figure
7
Figure
162 of 228
CHAPTER 8: WATER TANK FILLING
Fig. 4: Insert the end of the hose without the filter into
the connector. The end with the filter must be inserted
into the water jerry-can.
Fig. 5: Press PUMP to fill.
The required filling time is shown on the display.
Fig. 6: Detach the filling hose and insert the tray
holders in the chamber.
Press SELECT to select a programme.
Fig. 7: Keep the door closed and press START/STOP.
MAINTENANCE AND USE MANUAL
EN
5-litre jerry-can (full load: 4.5 l).
zetaclave B