Publicidad
Idiomas disponibles
Idiomas disponibles
GB
IE
Yellow LED illuminated:
Battery charged to 60%
-> e. g. for overwintering)
Red + green LEDs fl ash: Over-
heated
Red LED illuminated: Battery
defective
Connect the charger
to the Lidl Home app
Only Smart Performance
chargers can be connected
to the Lidl Home app.
1. Connect the charger to the
mains supply.
The WLAN indicator (9) fl as-
hes blue when the charger
is ready to be connected to
the app.
2. Enable Bluetooth® and
WLAN on your smartphone.
3. Open the Lidl Home App.
From here there are options
,
and
the charger.
30
to connect
If the charger is the fi rst
device you want to connect to
the app:
4. On the
option "Add device".
The app scans the area for
available devices and indi-
cates if available devices
have been found.
If this is not the case,
read on if possible
.
5. If you select "Go to add",
the available devices are
displayed in a list.
6. Select the charger by setting
the check mark
only one device at a time. If
there are other check marks
for other devices, clear the
check marks by pressing
them.
7. Now press the
the same color as the set
check mark.
8. Enter a WLAN name and
the corresponding password
to connect the charger to the
WLAN.
tab, select the
. Select
, that has
Publicidad
