Publicidad
Idiomas disponibles
Idiomas disponibles
The device is part of the (Parkside) X 20 V
TEAM series and can be operated using
(Parkside) X 20 V TEAM series batteries.
The batteries may only be charged using
chargers from the (Parkside) X 20 V TEAM
series.
General Description
The diagram of the most impor-
tant functional elements can be
found on the foldout side.
Scope of Delivery
Carefully unpack the appliance and check
that it is complete:
-
Device
-
Spray lance
-
Suction hose
-
Mesh bag
-
Cleaning agent nozzle with container
-
Cleaning agent bottle
with 500 ml of cleaning agent
-
Instructions for use
Battery and charger are not
included.
Dispose of the packaging material cor-
rectly.
Overview
1 Ventilation slits
2 Release button
3 Switch lever
4 Water connection
5 Guide rail
6 Cleaning agent container
7 Cleaning agent nozzle
8 Nozzles
9 Spray lance
10 Cleaning agent bottle
11 Suction hose with filter basket
12 Mesh bag
13 Rechargeable battery
14 Release button
15 Charger
Functional description
The cordless pressure washer cleans and
irrigates using a water jet.
If necessary, it can also be operated with
the addition of cleaning agents.
For the functions of the operating elements
please refer to the subsequent description.
Ensure that the safety instructions are al-
ways observed!
Technical data
Cordless pressure
washer .................... PDRA 20-Li C3
Motor voltage U .......................... 20 V
Weight (incl. accessories/
Cleaning agent) ...................... ca. 2.7 kg
Degree of protection ......................... IPX0
Rated pressure/
Working pressure (p max.) ......... 2.5 MPa
Max. intake pressure (p in max) .. 0.5 MPa
Max. rated flow rate. ................ 2.5 l/min
Max. intake temperature (water) ..... 30 °C
Suction hose .................................... 6 m
Cleaning agent tank volume ..........500 ml
Sound pressure level
(L
) ....................... 75.7 dB; K
pA
Sound power level (L
measured ..........86.7 dB; K
guaranteed ............................... 89 dB
Vibration (a
) ...1.7046 m/s², K= 1.5 m/s
h
Temperature...........................max. 50 °C
Charging process ...................4 - 40 °C
Operation .......................... -20 - 50 °C
Storage .................................0 - 45 °C
GB
MT
= 3 dB
pA
)
WA
= 2.24 dB
WA
2
19
Publicidad
