Descargar Imprimir esta página

Parkside PDRA 20-Li C3 Traduccion Del Manual De Instrucciones Originale página 26

Hidrolimpiadora recargable

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 86
GB
MT
Adjusting the nozzles
Six different nozzles can be used on the
spray lance.
The nozzles can be changed by turning the
nozzle attachment.
A small arrow on the top of the spray
lance indicates which nozzle is currently
selected.
Jet sprays upwards
Gentle spray for watering/
washing
Using detergents
This device has been designed to be used
with a neutral, biodegradable cleaning
agent. Other detergents or chemical sub-
stances could impair the safety of the pres-
sure cleaner and damage it. Such damage
to the equipment is not covered by the
guarantee. You can buy cleaning agents
from our online shop.
The supplied cleaning agent con-
tains 5-15% anionic surfactants
Surfactants are "detergent substances" that
consist of a hydrophilic and a hydrophobic
molecule component. The hydrophobic
component encases the grime. The hydro-
philic component bonds the grime with the
water, allowing grease to dissolve in water,
for example. With anionic surfactants, the
molecule component is negatively charged.
For example: Soap is the most well known
anionic surfactant.
26
0°/15°/25°/40°
spray angle
Cleaning and
Maintenance
Remove the battery before carry-
ing out any work on the device.
This also includes connecting to the
water supply or trying to eliminate
leaks.
There is a risk of electrocution or of
injury from moving parts.
Ask our service centre to car-
ry out any work that is not
described in these instruc-
tions. Use only original parts.
Cleaning
Never direct the water jet
against the pressure cleaner,
nor clean the pressure clean-
er under flowing water. This
could give rise to the danger
of electric shock and damage
the pressure cleaner!
Always keep the pressure cleaner
clean. Do not use any detergents or
solvents.
• Always keep the ventilation slots (1)
clean and free.
• Clean the device with a soft brush or
damp cloth.
• If the nozzles (8) on the spray lance (9)
are soiled or clogged, you can remove
any foreign bodies in the nozzle using
a needle.
Rinse the nozzles with water to remove
the foreign body.

Publicidad

loading