Publicidad
Idiomas disponibles
Idiomas disponibles
GB
MT
For use with smart batteries
(Smart PAPS 204 A1/Smart PAPS 208 A1)
Operating frequency/
Frequency band .....2400 - 2483.5 MHz
Max. transmission power ....... ≤ 20 dBm
The values for noise and vibration were
determined according to
EN 60335-2-54:2008/A2:2021.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
Charging time (min)
PLG 20 A1
PLG 20 A4
PLG 20 C1
PLG 20 C2
PLG 20 A2
PLG 20 A3
PLG 20 C3
PDSLG 20 A1
PDSLG 20 B1
PLG 201 A1
Smart PLGS 2012 A1
20
PAP 20 A1
PAP 20 A3
PAP 20 A2
PAP 20 B3
PAP 20 B1
Smart PAPS 204 A1
60
45
35
135
35
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).
Charging time
The device is part of the (Parkside) X 20 V
TEAM series and can be operated with
batteries of the (Parkside) X 20 V TEAM
series.
Batteries of the (Parkside) X 20 V TEAM
series may only be charged using chargers
of the (Parkside) X 20 V TEAM series.
We recommend that you operate
this appliance with the following bat-
teries only: PAP 20 B1, PAP 20 B3,
Smart PAPS 204 A1, Smart PAPS 208 A1.
We recommend charging these batteries
with the following chargers: PLG 20 A3,
PLG 20 A4, PLG 20 C1, PLG 20 C2,
PLG 20 C3, PLG 201 A1, PDSLG 20 A1,
PDSLG 20 B1, Smart PLGS 2012 A1.
Smart PAPS 208 A1
120
80
60
250
45
240
165
120
500
50
Publicidad
