The grinding level setting only
takes effect after the second cup.
Tip: If the coffee is only dispensed
drop by drop, set a coarser grinding
level.
If the coffee is too thin with too little
crema, set a finer grinding level.
9 Basic settings
You can configure the basic settings
for your appliance to meet your
needs and call up additional func-
tions.
9.1 Selecting automatic
switch-off
Your appliance switches off automat-
ically after the last button is pressed.
You can set the time period to
between 15 minutes and 4 hours.
Press and hold buttons
1.
simultaneously for at
least 3 seconds.
Press the
2.
The automatic switch-off menu will
a
be activated.
To set the required time period,
3.
press the
The following settings are possible:
–
15 min
–
30 min
–
1 h
–
2 h
–
4 h
Press the
4.
save the settings.
Press the
5.
the menu.
1
Factory setting
and
button.
button.
1
button to
button to exit
9.2 Switching the signal tone
on or off
If you press a button, a signal tone
sounds. You can switch the signal
tone on or off.
Press and hold buttons
1.
simultaneously for at
least 3 seconds.
Press the
2.
The signal tone menu is activated.
a
To switch the signal tone on or off,
3.
press
.
The following settings are possible:
1
–
On
–
Off
Press the
4.
the settings.
Press the
5.
the menu.
9.3 Setting the water hard-
ness
It is important to set the water hard-
ness correctly so that your appliance
indicates in good time that you have
to descale it. You can find out the
water hardness from your local water
supplier.
Press and hold buttons
1.
simultaneously for at
least 3 seconds.
Press the
2.
The water hardness menu is activ-
a
ated.
To set the water hardness, press
3.
the
button.
The following settings are possible:
–
water hardness 1
–
water hardness 2
–
water hardness 3
–
water hardness 4
Basic settings en
and
button.
button to save
button to exit
and
button.
1
45