Pet Hair - Hoover WindTunel Manual De Instrucciones

Check airflow path
Check wand
Check powered pet hair
cleaning tool
A
Q4. Remove hose from wand.
5. Plug cleaner in and turn ON.
Check for suction at end of hose. If there
is suction, continue with step 6. If there
is no suction, check for blockage in
hose. Clear blockage.
6. Turn cleaner OFF and discon-
nect from electrical outlet.
7. Remove wand from cleaner. Check
for blockage. Clear blockage.
Disconnect powered pet hair
g tool from hose.
Remove bottom plate, belt guard and
turbine as described in Figs. 47, 49
and 54.
Remove any blockage from turbine
channel (A).
Replace belt turbine, agitator brush
roll, belt guard and bottom plate.
(Cont'd) -*
17