Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE
The product can be used whilst charging. It is normal for the product to warm
u
up slightly whilst charging.
During the charging process, you may not be able to work with the product if
u
the battery is almost or completely empty. This depends on the charger used.
Stop charging
1. Disconnect the charger cable
2. Unplug the charger adapter
Battery level display
The battery status indicator
Battery status indicator
Constantly red LED
Red LED keeps flashing several times
and then powers off automatically
Constantly green LED
˜ Preparing the surfaces to be glued
Do not use flammable solvents to clean the surfaces to be glued.
The ambient temperature and the materials to be bonded may not be colder than
+5 °C and not warmer than +50 °C.
The area to be glued must be clean, dry and free of grease.
Smooth surfaces should be roughened before gluing.
Quick-cooling materials, such as steel, should be warmed a little to facilitate
adhesion.
40 GB/IE
from the product.
[
]
from the socket.
[
]
shows the charge level using 2 coloured LEDs.
8 ]
[
Charging status
8 ]
[
The battery is weak. Recharge the battery.
The battery is empty. Recharge the battery
before use.
The battery is medium to maximum charged.
Publicidad
