Descargar Imprimir esta página

Lenco DAR-061BK Manual Del Usuario página 14

Radio dab+/fm con reproductor de cd y bluetooth

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 67
BT Mode
Selecting bluetooth mode
If you are in other mode, press the Power I Mode button to enter the mode icon, this will
be shown in the LCD display. Turn the 'Prev/Next' knob on the unit or press the mode
button on remote control to choose the Bluetooth mode, then press the OK button on the
unit to confirm.
Make sure that no other Bluetooth device is connected to the radio. "No Connection"will
appear on the display.
Activate Bluetooth mode on the device that you want to connect. Look for the radio on the
list of detected devices on the Bluetooth device (refer to the instruction manual of the
device). Once the devices have found each other, the radio will appear as "Lenco DAR-061"
on the Bluetooth device.
Select Lenco DAR-061 from the list. If you are required to enter a PIN code, enter 0000 (four
zeros). Certain devices may also require you to approve the connection.
Once the connection has been successful, "Connected" will appear on the display of the
radio.
Start playback on your Bluetooth device.
Press
or
button on the unit and remote control to skip between tracks on the
device.
Press
button on the unit and remote control to pause or play.
CD Mode
Selecting CD mode
If you are in other mode, press the Power I Mode button to enter the mode icon, this will
be shown in the LCD display. Turn the 'Prev/Next' knob on the unit or press the mode
button on remote control to choose the CD mode, then press the OK button on the unit to
confirm.
1. Open the CD door by pressing the
2. Insert a CD disc into the CD compartment with the label side up.
3. Close the CD door by pressing the
PLAY/PAUSE operation
1. Press
button on the unit and remote control to start play
2. Press
button on the unit and remote control during playback to pause temporarily.
3. Press
button on the unit and remote control again to resume playback from the
point playback is interrupted.
or
operation
1. Press the
to the desired track.
2. Press and hold the
or forward to the desired point of the playback or track.
Press
button to stop playing.
button on the unit or Eject on the remote control.
button on the unit or Eject on the remote control.
button on the unit and remote control to skip backward or forward
button on the unit and remote control to search backward
14

Publicidad

loading

Este manual también es adecuado para:

Dar-061