Amanngirrbach Giroform Modo De Empleo página 27

▷ Align the impression at the end by manipulating
the putty on the wall/cube.
Fig. 6
▷ To check the height of the dental arch, place the
alignment plate with the pin inserted on the
aligned impression.
The retention end of the pin must not touch the
impression (clearance approx. 3 mm)
NOTE:
The adjacent teeth must be planned as a single
segment: The expansion of a long row of adja-
cent teeth limits the proximal area.
A P P L I C A T I O N
▷ Mark the saw cuts and drill holes for the pins on
the silicone putty.
Fig. 7
2 pins must be set for each removable segment
(rotation!).
If there is insufficient space:
▷ Mill 1 pin plus guide groove into the
plate.
E N
27