Amanngirrbach Giroform Modo De Empleo página 36

T E C H N I C A L D A T A
6.2.2 Replacing the drill bit
▷ Pull mains plug.
▷ Insert the retaining pin laterally into a hole in
the drilling axis.
E N
Fig. 42
▷ Turn the tubular socket wrench anti-clockwise
to unscrew the sleeve nut. Counter-hold with
the retaining pin while unscrewing.
Fig. 43
▷ Replace defective drill bit.
▷ Tighten sleeve nut again with the tubular socket
wrench turning clockwise. Counter-hold with
the retaining pin while tightening.
▷ Remove all tools.
▷ Insert mains plug again.
36
7 Technical Data
Subject to changes.
Giroform pin drill
Depth × Width × Height
Weight
Electrical connection
_ Voltage
_ Frequency
Electrical power input
Laser
_ Class
_ Laser power
_ Wavelength
_ Operation
Fuse (time-delayed)
Permissible ambient
conditions for operation
_ Operating area
_ Temperature
_ Maximum operating
elevation (standard
elevation zero)
_ Humidity (non-con-
densing)
Permissible ambient
conditions for transport
_ Temperature
_ Ambient pressure
_ Humidity
Tab. 2
Unit Value
250 × 183 × 370
mm
kg 9.6
V 100/110/230
Hz 50/60
W 75
– 2
mW < 1
nm 640 – 670
– Intermittent
duty
A/V 1/250
– Indoors
°C
18 ... 30
m 2000
% 80
°C
–20 ... +65
mbar
500 ... 1060
%
80