Amanngirrbach Giroform Modo De Empleo página 34

A P P L I C A T I O N
5.8 Articulating
5.8.1 With secondary plate
▷ Place secondary plate on finished Giroform
model.
E N
Fig. 32
▷ Apply articulating plaster onto the model and
onto the articulator side.
Fig. 33
▷ Close articulator without pressure.
Result: A precise and clean saw-cut model in the
articulator.
Fig. 34
34
5.8.2 With magnet and magnet pot
▷ Block out the pin ends with putty.
Fig. 35
▷ Place the space retainer foil in the centre and fix
it with magnets.
Fig. 36
▷ Apply plaster on both sides and close the artic-
ulator without applying pressure.
Fig. 37