Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
Cleaning
Exterior surfaces:
To avoid damage to the exterior surface, do not use steel wool
or soap-filled scouring pads. Rub in direction of the grain line
to avoid scratching the surface.
Always wipe dry to avoid water marks.
•
Stainless Steel Cleaner and Polish.
•
Mild liquid detergent and water.
•
Wipe with damp soft cloth or non abrasive sponge, then
rinse with clean water and wipe dry.
•
Do not use chlorine base cleaners.
Metal Filters and Drip Trays:
1 Use 2 hands to remove filters.
2 Grasp the filter handles, pull toward the front of the hood and
pull up on the rear handle.
1
2
A. Front handle
B. Rear handle
3 Pull down and forward on the hood front handle to remove the
filter.
4
3
A. Front handle
B. Rear handle
4 Remove grease drip tray.
A
A. Drip tray
5 Wash metal filters and grease trays as needed in dishwasher
or hot detergent solution to clean.
6 Replace grease drip tray.
10
A
B
5
A
B
B
7 Reinstall the filters, grasp the filter handles and place the back
edge of the filter into the hood.
A. Front handle
B. Rear handle
8 Push up and back on the rear handle and place the back of
the filter into the drip pan to secure it. Repeat for each filter.
3
2
Replacing a LED Lamp
Turn off the range hood and allow the LED lamp to cool.
To avoid damage or decreasing the life of the new lamp, do
not touch lamp with bare fingers. Replace lamp, using tissue
or wearing cotton gloves to handle lamp.
If new lamps do not operate, make sure the lamps are inserted
correctly before calling service.
1
Disconnect power.
2
Push up on the lens and turn it counterclockwise.
3
Remove the lamp and replace it with a 120-volt, 6.5 W watt
maximum LED lamp with a GU10 base. Turn it clockwise to
A
lock it into place.
4
Repeat steps 2-3 for the other lamps if needed.
5
Reconnect power.
A
1
B
4
A
B
A. Front handle
B. Rear handle
A
B
Publicidad
