Publicidad
Idiomas disponibles
Idiomas disponibles
English
S.
Model
Lifeline Material and Size
No.
Casing: Robust and durable plastic
Cable: Galvanized Steel cable 3/16 in / 4.8mm
28
DXFP210111-020
Hook: Steel Snap Hook
Casing: Robust and durable plastic
29
DXFP210221-025
Cable: Galvanized Steel cable 7/32 in / 5.5 mm
Hook: Steel Snap Hook
Casing: Robust and durable plastic
DXFP221111-025
30
Cable: Stainless Steel cable 13/64 in / 5.2 mm
Hook: Stainless Steel Snap Hook
Casing: Robust and durable plastic
31
DXFP210111-030
Cable: Galvanized Steel cable 3/16 in / 4.8 mm
Hook: Steel Snap Hook
Casing: Robust and durable plastic
32
DXFP210111-050
Cable: Galvanized Steel cable 3/16 in / 4.8 mm
Hook: Steel Snap Hook
Casing: Robust and durable plastic
33
DXFP221111-050
Cable: Stainless Steel cable 13/64 in / 5.2 mm
Hook: Steel Snap Hook
Casing: Robust and durable plastic
34
DXFP210221-050
Cable: Galvanized Steel cable 7/32 in / 5.5 mm
Hook: Stainless Steel Snap Hook
Casing: Robust and durable plastic
35
DXFP210221-080
Cable: Galvanized Steel cable 7/32 in / 5.5 mm
Hook: Steel Snap Hook
Casing: Robust and durable plastic
36
DXFP221111-080
Cable: Stainless Steel cable 13/64 in / 5.2 mm
Hook: Stainless Steel Snap Hook
Casing: Robust and durable plastic
37
DXFP210111-090
Cable: Galvanized Steel cable 3/16 in / 4.8 mm
Hook: Steel Snap Hook
16
MARKING SAMPLE :
Lifeline
Conformity
Length
20ft
ANSI Z359.14-2021
Class 1
(6.96 m)
25ft
ANSI Z359.14-2021
(4.48 m)
Class 2
25ft
ANSI Z359.14-2021
(4.48 m)
Class 1
30ft
ANSI Z359.14-2021
(7.68 m)
Class 1
50ft
ANSI Z359.14-2021
Class 1
(15.2 m)
50ft
ANSI Z359.14-2021
(15.2 m)
Class 1
50ft
ANSI Z359.14-2021
(15.2 m)
Class 2
80ft
ANSI Z359.14-2021
(24.3 m)
Class 2
80ft
ANSI Z359.14-2021
USE: This device is meant to be used by a single person as a fall arrest device.The connections should only be made
(24.3 m)
Class 1
directly to the attachment point of a full body harness. Make sure that the connection to the anchorage is secured
properly before every use. Ensure the lifeline is kept safe and does not come in contact with sharp edge or abrasive
surfaces, and thermal, electrical or chemical hazards. This equipment may be used as a component of a personal fall
90ft
ANSI Z359.14-2021
(27.4 m)
Class 1
arrest system in horizontal lifeline applications. The design, installation or utilization of horizontal lifelines must be
supervised by a qualified or competent person. A competent person must calculate the fall clearance before each
use. The fall clearance must include consideration for swing falls. Refer to the fall clearance chart located in the energy
absorber label pack.
INSPECTION: Inspect unit in accordance with manufacturer's instructions and regulatory guidelines. Before use,
inspect for any signs of damage, wear, or malfunctioning components. Check lifeline retraction by pulling out the
entire length of the lifeline and allow to retract under light tension; lifeline should retract completely. Pull sharply to
test locking function; brakes must engage. Before use, inspect the condition and functions of the lifeline fasteners,
and legibility of labels. Also check for evidence of defects, damage, or missing parts. Check energy absorber for sign of
activation. Inspection must be done by a competent person and recorded every 6 months.
*
*
READ THE INSTRUCTION BEFORE USE:
English
ALWAYS READ INSTRUCTION
BEFORE USE
17
Publicidad
