Westinghouse WH3250C Manual Del Propietário página 26

OPERATION
2. Move the fuel shutoff valve to the ON position (see
Figure 22).
Figure 22 – Fuel Shutoff Valve in the ON Position
3. Move the choke lever to the ON position (see
Figure 23).
Figure 23 – Choke Lever
26
All manuals and user guides at all-guides.com
4. Push the engine control switch into the RUN
5. Firmly grasp and pull the recoil handle slowly until
6. As the engine starts and stabilizes, gradually move
position (see Figure 24).
Figure 24 – Engine Control Switch
you feel increased resistance. At this point, apply a
rapid pull while pulling up and slightly away from the
generator (see Figure 25).
Figure 25
the choke lever back to the OFF position.