PRESIDENT BILL Manual Del Usuario página 42

Indicates the frequency or the current menu (COLOR,
KEY-BP, RG-BP, EMG-ST, MIC-TP, RESET) in
Indicates current channel
5) F - FREQUENCY BAND SELECTION
See § FUNCTIONS TURNING ON THE UNIT page 43.
6) ANL/NB ~ HI-CUT
ANL/NB
(short press)
A short press on the ANL/NB key (6) allows you to alternate
between the following settings: no filter (default) / ANL
activated / ANL and NB activated.
The icon of the active filter appears on the display.
Warning: ANL filter works only in AM mode
HI-CUT
(long press)
A long press on the HI-CUT key (6) activates/ deactivates
(defaults) the HI-CUT filter. When the filter is activated
"HI-CUT"appears on the display.
HI-CUT: Cuts out the high frequency interferences and has
to be used in accordance with the reception conditions.
When active, the filter is displayed on display.
7) AM/FM ~ KEY LOCK
AM/FM
(short press)
The AM/FM key (7) allows you to select the modulation
mode AM or FM. Your modulation mode has to corre-
spond to the one of your correspondent. Selected mode
is displayed on the LCD.
Amplitude Modulation / AM: communication on a field
MENU
mode. with relief and obstacles at middle distance (the most
used).
Frequency Modulation / FM: for nearby communications
on a flat open field.
In U configuration ONLY: press AM/FM key (7) to alter-
nate the frequency band between ENG and CEPT. "UK"
appears in the display when the ENG band is selected.
"UK" disappears on the display when CEPT is selected
(see table at page 66).
KEY LOCK
Press and hold the
appears on the display.
Press and hold the
then unit. "
Note: The PTT switch (11) remains enable while the unit is
locked.
8) EMG
Emergency channel is automatically selected when by
pressing EMG Key (8). First short press to call the first emer-
gency customisable channel (or the default channel 9 /
AM). "EMG1" appears on the display. Second short press
to call the second emergency customisable channel
(or the default channel 19 / AM). "EMG 2" appears on
the display. Third short press to go back to the current
channel. "EMG..." disappears on the display.
See the menu EMG SETTING page 45.
42
(long press)
key (7) to lock then unit. "
key (7) again to unlock (default)
" disappears from then display.
"