3.3 Unpacking
Carefully remove the packaging material and unit from the carton. Remove the
protective fi lm from the unit.
PLEASE NOTE
If possible, keep the original packaging for the duration of the guarantee period in
the event a return is necessary.
3.4 Setup location requirements
In order to ensure the safe and trouble-free operation of the device, the setup location
must fulfi l the following prerequisites:
•
Only use this coff ee maker on a fl at, stable, heat-resistant surface away from water
splashes and any heat sources.
•
Choose the setup location in such a way that children cannot reach any hot surfaces
on the device.
•
Do not operate the device under delicate furniture as the escaping steam could
damage them.
•
Do not set up the device in a hot, wet or extremely damp environment or near fl am-
mable material.
•
The electrical socket must be easily accessible so that the power lead can be discon-
nected easily, in the case of an emergency.
•
The installation and assembly of this device in non-stationary setup locations (e.g.
on ships) must be carried out by specialist companies / electricians, provided they
guarantee the prerequisites for the safe use of this device.
•
The device shall not be placed in a cabinet while it is in operation.
3.5 Electrical connection
In order to ensure the safe and trouble-free operation of the device, the following instruc-
tions must be observed for the electrical connection:
•
Before connecting the device, compare the connection data (voltage and frequency) on
the rating plate with those of your electrical network. This data must agree in order that
no damages occur in the device. If in doubt, ask your qualifi ed electrician.
•
The connection between the device and the electrical network may employ a 3 meter
long (max.) extension cable with a cross-section of 1.5 mm². The use of multiple plugs
or gangs is prohibited because of the danger of fi re that is involved with this.
•
Make sure that the power cable is undamaged and has not been installed under the
device or over hot or sharp surfaces.
•
The electrical outlet must be protected by a 16A safety cut-out switch.
•
The electrical safety of the device is only guaranteed if the device is connected to a
properly installed protective conductor system. If in doubt, have the house installati-
on checked over by a qualifi ed electrician. The manufacturer cannot be made respon-
sible for damages that are caused by a missing or damaged protective conductor.
3.6 Warning notices
ATTENTION
Danger due to hot surface!
Do not touch the hot surfaces of the device. Danger of burns!
CASO Espresso Gourmet Latte
DE
EN
FR
ES
NL
RU
PT
TR
SE
31