CEMO DT-Mobil PRO Hybrid 980 l Basic Manual Del Usuario página 47

1.2.1 Summary
Any other use is considered inappropriate.
For safety reasons, the filling station must not be
modified (except for the addition of accessories
especially provided by the manufacturer) – see
section 6. The intended use includes compliance
with all the information in these operating
instructions.
1.3 Inappropriate use
i
Important!
Inappropriate use also includes failure
to comply with the directions in these
operating instructions.
I t a l s o i n c l u d e s :
• failure to comply with the regulations of the
ADR and applicable national regulations,
• storage and transport of liquids other than those
stipulated under intended use, e.g.: petrol,
bioethanol, chemicals, oils (lubricating oil,
hydraulic oil, vegetable oil).
1.4 Product description of electric
pump
i
Important!
Read and follow the separately enclosed
operating and maintenance instructions
with declaration of conformity from the
pump manufacturer.
The 12 V, 24 V or 230 V self-priming electric pump
is an electrically driven pump with a bypass valve
used to pump and dispense diesel fuels and similar
media from reservoir tanks.
When switched on with empty suction pipe and
partially filled pump, the electric pump is able
to suck in the liquid over a height difference not
exceeding 2 metres (filling process approx. 1
minute).
The pump motor is equipped with thermal overload
protection against overheating and a 12/24 V circuit
fuse.
Permissible media temperature: -10°C to +40°C
Permissible operating time:
• 30 minutes at maximum back pressure.
• maximum 2 minutes under bypass conditions.
i
Important!
Prolonged dry operation can destroy the
pump.
i
Important!
When connecting to the electricity supply,
always use the correct voltage.
GB
47