SSS Siedle Siedle Touch 10 Informacion De Producto página 13

LED signalling (LEDs on ST 10-... device front)
Red LED Green LED
Off On
On On
On Flashes rapidly
Flashes rapidly Off
Flashes slowly Flashes slowly
Flashes slowly Off
Flashes slowly On
Function
• Normal status: Booting is complete. All OK.
• After software reset: Device boots to operating status.
Power on, after hardware reset: Device boots to operating status.
The boot area is checked. Software runs in the flash.
General error when checking the boot area
Error when starting the software
Vario bus address error
Vario bus address error (error remedy possible on site)
13