Publicidad
Idiomas disponibles
Idiomas disponibles
Trinitron®and
FD Trinitron
® are registered
trademarks
of Sony
Corporation.
Macintosh
is a trademark
licensed
to Apple
Computer,
Inc., registered
in
the U.S.A.
and other countries.
Windows
® and MS-DOS
are registered
trademarks
of Microsoft
Corporation
in the United
States
and other countries.
IBM PC/AT
and VGA are registered
trademarks
of IBM Corporation
of
the U.S.A.
VESA
and DDC
TM
are trademarks
of the Video
Electronics
Standard
Association.
ENERGY
STAR
is a U.S. registered
maN.
•
All other product
names
mentioned
herein
may be the trademarks
or
registered
trademarks
of their respective
companies.
•
Furthermore,
"r_" and "®" are not nlentioned
in each case in this manual.
Precautions
Warning
on power
connections
• Use the supplied
power
cord.
• Before
disconnecting
the power
cord, wait at least 30 seconds
after turning
off the power
to allow the static electricity
on the
screen's
surface
to discharge.
• After the power
is turned
on, the screen
is demagnetized
(degaussed)
for alx_ut 5 seconds.
This generates
a strong
magnetic
field around
the screen which may affect data stored on
magnetic
tapes and disks placed near the monilor.
Be sure to keep
magnetic
recording
equipment,
tapes, and disks away from the
monitor.
The equipment
should be installed
near an easily accessible
outlet.
Installation
Do not install the monitor
in the following
places:
• on surfaces
(rugs, blankets,
etc.) or near materials
(curtains,
draperies,
ete.) that may block 1he ventilation
holes
• near heat sources
such as radiators
or air ducts, or in a place
subject
to direct sunlight
• in a place subject
m severe temperature
changes
• in a place subject
m mechanical
vibration
or shock
• on an unstable
surface
• near equipment
which generates
magnetism,
such as a
transformer
or high voltage
power
lines
• near or on an electrically
charged
metal surface
• in a dusty or smoky environment
• inside an enclosed
rack
Protection
• Do not put foreign objects into the monilor.
• Disconnect the monitor if environment exceeds 60°C/140°F.
• Ensure AC power cord is not trapped under furniture, TV, ete.
• Do not overload wall outlets, extension cords, or convenience
receptacles beyond their capacity.
• Never spill liquid of any kind on the monitor.
Notes
on cleaning
the screen's
surface
• The screen's
surface is covered
with a thin anti-reflective
coating
Io enhance
the ergonomic
characteristics
of the monitor.
"I_
ensure
that the coating
is not damaged,
use a soft cloth to clean
the screen's
surface.
If necessary,
use a soft cloth lightly
moistened
with a mild detergent
solution,
such as hand soap, to
wipe the screen.
• Do not use any type of abrasive
pad, alkaline
cleanser,
scouring
powder,
or solvenls
such as alcohol
or benzene
as they might
damage
the anti-reflective
coating.
•
If you use a glass cleaning
liquid, do not use any type of cleaner
containing
an anti-static
solution
or similar
additive
as this may
scratch
the screen's
coating.
• Do not rub, touch, or tap the surface
of the screen with sharp or
abrasive
items such as a ballpoint
pen or screwdriver.
This type
of contact
may result in a scratched
picture
tube.
Notes
on cleaning
the cabinet
• Clean
the cabinet,
panel and controls
with a soft cloth lightly
moistened
with a mild detergent
solution.
• Do not use any type of abrasive
pad, scou ring powder or solvent,
such as alcohol
or benzene.
Transportation
When you transport
this monilor
for repair or shipment,
use the
original
carton
and packing
materials.
Display Stand
Do not remove this monilor's stand.
Use of the tilt-swivel
This monitor
can be adjusted
within the angle shown
below. To turn
the monitor
vertically,
hold it at the bottom
with bolh hands.
Be
careful
not to pinch
your fingers
at the back of the monitor
when
you tilt the monitor
up verticaly.
Centering line
Publicidad
