Garland SET KEEPER 20V 252 Manual De Instrucciones página 36

English
out completely.
- Always recharge the battery after using the machine.
Do not store the battery discharged or half charged.
- Always recharge the battery inside your home and
garage to preserve the battery and charger from
humidity and inclement weather.
- Recharge the battery at temperatures between 5º
and 40º C.
- Always keep the battery away from water, humid
areas, heat sources and chemical products.
6.5. INSTALL THE BATTERY
2
1
To remove the battery, press the unlock button (1) and
pull the battery (2) back.
7. MAINTENANCE AND SERVICE
Carry out random inspections on the machine to
ensure an efficient use of the machine. For a complete
maintenance take the machine to your nearest service
agent.
It is always necessary to stop the machine, wait
for the blades to stop before carrying out any cleaning
or maintenance work on the machine and when
transporting the machine.
Install the battery by
sliding it along the rails
until "clack" sounds. This
ensures that it will remain
securely connected to the
machine.
36/124
Never attempt to carry out any maintenance work
on the machine if the machine is running. Carry out
all maintenance work on a flat surface and on a clear
surface.
Remove the battery before performing any operation
on the machine. Read the instruction manual before
performing any operation on the machine.
WARNING !: Do not modify the machine or the cutting
elements. Improper use of these elements can cause
SERIOUS PERSONAL INJURY OR DEATH.
Use only suitable spare part for this machine
in order to obtain an adequate performance of the
machine. You can find this spare part in the official
dealers of the machine. The use of other spare parts
can cause accidents to the user, the people around
and the machine.
7.1. MAINTENANCE AFTER USAGE
Carry out the following maintenance work once
you finish your task to guarantee that the machine
functions correctly next time.
7.1.1. GENERAL CHECKS
Check the battery status
7.1.2. CLEANING
Attention! Always clean the machine after use.
Not cleaning the machine adequately will result
in damages to the machine and the machine will
work less. Wherever possible, clean the machine
immediately after working with it.
Maintain your machine clean and in good conditions.
Do not clean the engine with water. The electric
engine could stop functioning.
Clean the covers of the machine with a damp cloth.