Phonocar VM486 Manual De Instrucciones página 19

5
MANUAL CAMERA ENABLE/DISABLE
L
B
Enabling the camera is used to be able to display images on the
channel dedicated to it and to make the DVR function active on the
camera.
Up to a maximum of 4 cameras can be enabled.
N.B. CAMERA ENABLEMENT IS REQUIRED FOR PAIRING WITH
THE MONITOR.
Access the main menu with the MENU key (E),
with the UP (B) and DOWN (C) keys, select the
"Cam-Setup" function (L) and confirm with the SEL button (F).
C D E F
Use the UP (B) and DOWN (C) buttons to select the channel dedicated
to the camera you are installing.
Example Camera 2 -> channel 2:
Select "WEBCAM 2" (the icon will light up yellow),
confirm with the SEL (F) button (the icon will light up red).
Using the UP (B) and DOWN (C) keys, select:
"ON" to enable the camera and activate the DVR function.
"OFF" to disable the camera and stop the DVR function.
Press the SEL (F) key to confirm.
19
VM486
EN