Phonocar VM486 Manual De Instrucciones página 20

VM486
EN
6
MATCHING CAMERAS AND MONITORS
H
B
N.B. BEFORE MATCHING A
VIDEO CAMERA IT IS NECESSARY TO ENABLE IT.
See Chapter 5.1 "Manual Camera Enable/Disable" to enable the
camera.
DURING THE PAIRING PHASE KEEP THE CAMERA AT A
DISTANCE OF NO MORE THAN 15 METERS.
After enabling the camera:
- Press the MENU key (E) twice.
- With the CH key (D) select the channel previously enabled for the
camera you want to match, the screen of will present all black with
the words "no signal" in the middle and the icon of the selected
channel will be in the upper left corner.
Ex. Connect the first additional camera:
Enable channel 2, select channel CH2.
C D E F
2
- Press the MENU key (E) again.
- Use the UP (B) and DOWN (C) buttons to select the "Pairing"
function (H) and confirm with the SEL (F) button.
A countdown will appear on the screen, after which the pairing
procedure will be completed and camera images will be displayed.
Proceed in the same way to match any other cameras (up to a
maximum of 4).
20