Publicidad
the manufacturer, its service agent, or similarly qualifi ed persons in order
to avoid a hazard. Contact Vornado Consumer Service at 1-800-234-0604
(phone) or consumerservice@vornado.com (email) for further instructions
about replacement and repair.
- Before plugging power cord into electrical outlet, be sure that all electrical
information on the rating label, including voltage, is compatible with your
outlet's power supply.
- Do not sit or stand on product.
- Never use the cord as a handle or otherwise yank, strain or stretch the
power cord.
- While the product is plugged in, do not insert or allow foreign objects to
enter any input or output opening as this may cause risk of electric shock or
fi re, or damage the product.
- A loose fi t between wall outlet (receptacle) and plug may cause overheating
and distortion of the plug. Discontinue use of the product in this outlet.
Contact a qualifi ed electrician to replace loose or worn outlets.
- This appliance has a polarized plug (one blade is wider than the other.) To
reduce the risk of electric shock, this plug is intended to fi t in a polarized
outlet only one way. If the plug does not fi t fully in the outlet, reverse the
plug. If it still does not fi t, contact a qualifi ed electrician. Do not attempt to
defeat this safety feature.
- Before moving, repositioning, servicing, cleaning and when not in use, use
the product controls to turn off the power and then unplug. To disconnect
from outlet, grasp and pull only the plug. Also, power off and unplug if the
product will be left unattended for an extended period of time or during
electrical storms.
6 English
NETTOYAGE
Puisque le ventilateur Flippi déplace une importante quantité d'air, il aura besoin
d'être nettoyé régulièrement. Le ventilateur ne contient aucune pièce réparable par
l'utilisateur; il est impossible de l'ouvrir pour le nettoyer. Ne nettoyez jamais l'appareil
d'une façon différente de celle expliquée dans le présent guide d'utilisation.
1. Avant de nettoyer l'appareil, mettez-
le hors tension, puis débranchez-le.
2. Époussetez le ventilateur ou essuyez-
le à l'aide d'un chiffon humide.
3. Utilisez un aspirateur domestique,
équipé de sa brosse, pour éliminer la
poussière accumulée.
Remarque : Le moteur est lubrifi é
en permanence; il n'est donc pas
nécessaire de le graisser.
Français 39
Publicidad
