Descargar Imprimir esta página

Silvercrest SBL TW20 A1 Instrucciones De Utilización Y De Seguridad página 31

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 131
When the integrated rechargable battery is drained, there will
 
be a notification sound signal every 2 minutes and the LED 3
will blink red. The integrated rechargable battery should then
be charged as soon as possible.
Depending on the volume and the age of the battery, the
 
operating time of the product is approx. 4 hours of music
playback when fully charged.
Insert the USB-C plug of the charging cable 11 into the USB-C
 
charging socket 4 of the product. Insert the USB-A plug of the
charging cable 11 into the USB port on a USB adapter (not
included in scope of delivery).
NOTE: The LED 3 will light up red whilst charging and then
turn off once charging is complete. The charging time for a drained
battery is approx. 3.5 hours.
NOTE: The product may be used whilst charging. However,
doing so will at a minimum double the charging time.
Once charging is complete, remove the USB-C plug of the
 
charging cable 11 from the product.
˜ Using the product
Press and hold the
 
light flashes and a signal tone sequence sounds. The product
will now attempt to connect to the playback device (e.g.
smartphone or computer).
˜ Establishing a Bluetooth
Remove all plugs from the AUX-in jack 2 before you attempt to
 
establish a Bluetooth
Switch on the playback device and make sures its Bluetooth
 
mode is on.
32 GB/IE
button 7 for 2 seconds until the RGB
connection.
®
connection:
®
®

Publicidad

loading

Este manual también es adecuado para:

367102 2101