Publicidad
Idiomas disponibles
Idiomas disponibles
The "master" unit RGB light will still be flashing waiting to
pair with the playback device. Once the "master unit" has
successfully paired with the playback device both the "master"
and "slave" units can be played and controlled synchronously
during Bluetooth
Press the button 5 again to break the TWS pairing
connection, the RGB light on the connected "slave" unit flashes
and a signal tone sequence sounds.
NOTE: The product which had its button 5 pressed first will
become the "master" unit (in the left audio channel), and the other
unit will then by default becone the "slave" unit (in the right audio
channnel).
RGB light mode button 9
1. Press and hold for 2 seconds to turn ON the RGB light.
2. Press and hold for 2 seconds to turn OFF the RGB light.
3. Briefly press the RGB light mode button 9 and it will change the
light mode.
˜ Cleaning
Switch the product off and remove all cables before cleaning.
Only clean the outside of the product using a soft, dry cloth!
˜ Storage during non use
Store the product in a dry environment when not in use. Protect
it from dust and direct sunlight. The rechargeable battery needs
to be charged regularly.
36 GB/IE
playback mode.
®
Publicidad
