Publicidad
Idiomas disponibles
Idiomas disponibles
On the product press and hold the
until the RGB light flashes and a signal tone sequence sounds.
The product will now attempt to connect to the playback device
(e.g. smartphone or computer).
The product identification on the playback device will be "SBL
TW20 A1". On the playback device "ACCEPT" the connection.
Please note the requirements of the software on the playback
device.
Once the connection is made the RGB light will light up and a
signal tone sequence sounds.
The maximum range of the connection is approx. 10 m, but this
may be reduced due to the geometry of the space (obstructing
furniture, walls, etc.).
The playback device must support Bluetooth
otherwise you may not be able to use all the functions.
˜ Functions of the buttons
Start a playlist on your playback device.
The product has 5 buttons and these control the following
functions:
Button
Function
‒ Press and hold for approx. 2 seconds to switch the
product on or off.
‒ Press briefly during playback to pause or continue
playback.
‒ Press and hold for approx. 2 seconds to enable /
disable the Bluetooth
button 5 for 2 seconds
standard v5.0
®
connection.
®
GB/IE
33
Publicidad
