Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Warning!
•
Packaging material (e.g. Films, Styrofoam) can be dangerous for children.
•
There is a risk of suffocation! Keep all packaging well away from children.
1.
Remove the cardboard box and styrofoam packing.
2.
Lift the washing machine and remove the base packaging. Make sure the small triangle
foam (a) is removed with the bottom packaging together. If not, lay the unit down on the
side surface and remove it manually.
3.
Remove the tape securing the power supply cord and drain hose.
4.
Remove the inlet hose from the drum.
Remove transport bolts
Warning!
•
You must remove the transport bolts from the backside before using the
product.
1.
Loosen the 4 transport bolts with a spanner.
2.
Remove the bolts including the rubber parts and keep them for future use.
3.
Close the holes using the cover caps.
Levelling the washing machine
Warning!
•
The lock nuts on all four feet must be screwed tightly against the housing.
1.
Loosen the lock nut.
2.
Turn the foot until it reaches the floor.
3.
Adjust the legs and lock the nuts with a spanner. Make sure the machine is level and steady.
39
EN
Publicidad
