Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Acoustic Sponge
Note:
•
Please make sure to assemble the acoustic sponges, which can effectively
reduce the noise caused by the machine while working, in order to provide
you with a more peaceful and quiet living environment.
1.
Get the machine laid on the floor, using some soft material like foam or clothes between
the machine and floor for a protection.
2.
Stick the 2x longer sponges to the longer bottom edges of machine, and the 2x shorter
sponges to the shorter bottom edges.
Operation
Quick Start
Caution!
•
Before washing, please make sure the washing machine is installed properly.
•
Your appliance was thoroughly checked before it left the factory. To remove any
residual water and to neutralize potential odors, it's recommended to clean
your appliance before first use. For this reason, start the Cotton program at
90°C without laundry and detergent.
Calibration
It's recommended to calibrate the washing machine, so that provide the best performance.
The appliance is able to detect the amount of laundry loaded. This function is optimizing the
product performance by minimizing energy and water consumption, saving you money and
time. For this reason it's recommended to calibrate the appliance for best use.
1.
Remove all accessories from the drum and close the door;
2.
Insert the mains plug to the socket;
3.
Switch on the washing machine, and within 10 seconds, press "Temp." and "Ai-Dose"
simultaneously and continuously (normally 3 seconds) until "t19" is displayed on the knob.
41
EN
Publicidad
