Publicidad
Idiomas disponibles
Idiomas disponibles
Receiving calls
1 When you hear the phone ring;
¢ Press
(or any key except COFF)) .
or
¢ Pick up the handset from the
base phone when the handset
is placed on the base phone.
the handset and the IN USE
the base phone.
the handset and the IN USE
lamp on the base phone go off.
Additional tasks
To
Do this
The TALK/BATT LOW lamp on
lamp on the base phone light up.
2 When you're done talking, press
or replace the handset on
The TALK/BATT LOW lamp on
Put a call on hold
Press (HOLD).
The TALK/BATT LOW lamp flashes slowly.
Press
to resume the conversation.
Select a better channel
Press CCHANNEL).
Adjust the handset volume
Set the VOL switch to H (high), M (middle) or L (low).
Switch to tone dialing
Press
while using the telephone after you're connected.
temporarily
The line remains in tone dialing until disconnected.
Switch to another call
Press
to access the flash function.
("call waiting" service*)
Press
again to return to the first caller.
Turn on/off the ringer
See "Setting the ringer type" on page 23.
of the handset
* You need to subscribe to the service from your telephone company.
Receiving calls through the speakerphone
When the phone rings, press
on the base phone.
The SPEAKERPHONE lamp and the
IN USE lamp light up.
"- -" appears on the display.
To adjust the speaker volume,
press
or (VOL =).
When you are done talking, press
again.
~
To obtain the best speakerphone
SPEAKERPHONE
performance, see page 18.
lamp
To adjust the ringer volume, see page 24.
SPEAKERPHONE
Basics
soiseg
i
19/5
Publicidad
