1. Closure Assembly
1.2 Install the Uncut Cable
1
Unlock the limiting button to turn over all the splicing trays from the bottom
(Figure 1-2).
2
Remove the cable clamp from the cable entry (Figure 1-3).
04-063-93-47BE_RevA.indb 3
04-063-93-47BE_RevA.indb 3
Figure 1-2: Turn over all the trays
Figure 1-3: Remove cable clamp
3
1/31/2024 3:40:59 PM
1/31/2024 3:40:59 PM